|
expressMARK ETC Product Test Results |
| MATERIAL DESCRIPTION: |
Continuous strip, low fire hazard, UV stabilised, cross linked
polyolefin sheet, formed into punched tie on cable markers. Markers have perforated edges for easy removal. |
| USE: |
Identification of larger cables and wire bundles. Markers are printed by
computer-based printing and attached using cable ties. Ideal for applications where low fire hazard characteristics
(low smoke, low toxicity and low flammability) are critical.
|
| PRINT METHOD / RIBBON: |
Thermal transfer: T312M-PRINTER, 1966-RIBBON
T212M-PRINTER, T200-RIBBON-1966 |
| SERVICE TEMPERATURE: |
-40°C to +105°C (-40°F to +221°F). |
| COLOURS: |
White or yellow as standard. |
| OXYGEN INDEX: |
34% minimum (BS EN ISO 4589-2 [1996]). |
| SMOKE EMMISSION: |
0.017 maximum (BS 6853 [1999] Annex D.8.3). |
| TOXIC FUME: |
R < 1 (BS 6853[1999] Annex D.8.3 – Mass based test method - NF X 70-100) |
| LUL TOXIC FUME: |
No Halogens, no P, S, or N sources above trace level (LUL E1042:A2 [1996]). |
| TENSILE STRENGTH: |
7MPa minimum. |
| MOULD GROWTH: |
Rating 2 maximum (BS 2011 Part 2.1J). |
| COLOUR FASTNESS: |
Hue matches original marker; print legible (BS 2782 Part 5 Method 540B). |
UV RESISTANCE:
(base polymer) |
Tensile strength > 90% & Ultimate elongation > 40% of original value after 1000
hours (ASTM G53: UVA [100% dry cycle]; UVB [8 hours dry/4 hours wet cycle]). |
PRINT PERMANENCE:
-ADHERENCE
-FLUID RESISTANCE |
Meets the requirements of SAE AS81531 4.6.2 (50 rubs).
Meets the requirements of MIL-STD-202F method 215J. |
FLUID RESISTANCE,
Additional: |
|
THREAT
(*indicates thermal transfer
printing with 1966 ribbon only) |
TEST |
EFFECT |
| Locomotive diesel |
10 wipes dry tissue |
Print legible |
| Paint stripper wipe |
IEC 60684-2
(24 hours at 23°C (73°F), 25 strokes dry tissue) |
Print legible |
Phospate Ester based
ISO 1817 liquid 103 |
IEC 60684-2
(24 hours at 70°C (104°F), 25 strokes dry tissue) |
Print legible |
Diesel
SAE J 1703 |
IEC 60684-2
(24 hours at 23°C (73°F), 25 strokes dry tissue) |
Print legible |
| Propan-2-ol |
IEC 60684-2
(24 hours at 23°C (73°F), 25 strokes dry tissue) |
Print legible |
All the above information, including illustrations, is believed to be reliable.
Users, however, should independently evaluate the suitability of each product
for their application. expressMARK makes no warranties as to the accuracy or
completeness of the information and disclaims any liability regarding its use.
expressMARK's only obligations are those in the Standard Terms and Conditions
of Sale for this product and in no case will expressMARK be liable for any
incidental, indirect or consequential damages arising from the sale, resale, use
or misuse of the product. expressMARK Specifications are subject to change
without notice. In addition expressMARK reserves the right to make changes
in materials or processing, without notification to the Buyer, which do not
affect compliance with any applicable specification.
|
|
