| MATERIAL DESCRIPTION: |
Thin wall, zero-halogen, low smoke, low toxicity, radiation cross-linked, UV
stabilised polyolefin heat-shrinkable tubing, assembled as cut sleeves organized
in a ladder format. |
| USE: |
Identification of wires and cables by computer-based printing onto sleeves.
Ideal for applications where limited fire hazard characteristics are critical. The
zero halogen material coupled with low smoke and low toxic fume emissions
make this product ideal for use in enclosed spaces such as mass transit, marine
and industrial installations. This product is not recommended where strain relief
properties are required. |
| PRINT METHOD / RIBBON: |
Thermal transfer: T312M-PRINTER, 1966-RIBBON
T212M-PRINTER, T200-RIBBON-1966 |
| SERVICE TEMPERATURE: |
-30°C to +105°C (-22°F to +221°F). |
| MINIMUM SHRINK TEMPERATURE: |
135°C (275°F) |
| COLOURS: |
White or yellow standard. Other colors available on request with MOQ conditions. |
| FLAMMABILITY: |
Self-extinguishing (ASTM D2671 Procedure B). |
| OXYGEN INDEX: |
34% minimum (BS EN ISO 4589-2 [1996]). |
| SMOKE EMMISSION: |
0.017 maximum (BS 6853 [1999] Annex D.8.3). |
| TOXIC FUME: |
< 1 (BS 6853 [1999] Annex B – Mass based test method - NF X 70-100) |
| LUL TOXIC FUME: |
No Halogens, no P, S, or N sources above trace level (LUL E1042:A6 [2002]). |
| TENSILE STRENGTH: |
7MPa minimum. |
UV RESISTANCE:
(base polymer) |
Tensile strength > 90% & Ultimate elongation > 40% of original value after 1000
hours (ASTM G53: UVA [100% dry cycle]; UVB [8 hours dry/4 hours wet cycle]). |
PRINT PERMANENCE:
-ADHERENCE
-FLUID RESISTANCE |
Meets the requirements of SAE AS81531 4.6.2 (50 rubs).
Meets the requirements of MIL-STD-202F method 215J. |
FLUID RESISTANCE,
Additional: |
|
THREAT
(*indicates thermal transfer
printing with 1966 ribbon only) |
TEST |
EFFECT |
Xylene/butylacetate/cyclohexan
one mix (Paint stripper) |
10 wipes dry tissue |
Print legible |
| Locomotive diesel |
10 wipes dry tissue |
Print legible |
| Tunnel dust/white spirits |
LUL C3349
(72 hours, 20 strokes dry tissue) |
Print legible |
Water
10W-40 (SAE J 183, SAE J300) |
LUL C3349
(72 hours, 20 strokes dry tissue) |
Print legible |
Tunnel Dust and Oil (50%/50%)*
SAE J 1703 |
LUL C3349
(72 hours, 20 strokes dry tissue) |
Print legible |
| Tunnel Dust and Water
(50%/50%)* |
LUL C3349
(72 hours, 20 strokes dry tissue) |
Print legible |
| White Spirits* |
LUL C3349
(72 hours, 20 strokes dry tissue) |
Print legible |
| Diesel* |
LUL C3349
(72 hours, 20 strokes dry tissue) |
Print legible |
| Grease* |
LUL C3349
(72 hours, 20 strokes dry tissue) |
Print legible |
Glycol rail de-icer
(50%glycol/50% water) |
LUL C3349
(72 hours, 20 strokes dry tissue) |
Print legible |
| Cleaning solvent* |
LUL C3349
(72 hours, 20 strokes dry tissue) |
Print legible |
| Surface Cleaner (PGP500)* |
LUL C3349
(72 hours, 20 strokes dry tissue) |
Print legible |
Multi-Purpose Graffiti
remover gel* |
LUL C3349
(72 hours, 20 strokes dry tissue) |
Print legible |
| CGR gel (Chewing gum remover)* |
LUL C3349
(72 hours, 20 strokes dry tissue) |
Print legible |
| IRM 902 Oil |
pr EN50343
(24 hours at 50°C (122°F), 10 wipes) |
Print legible |
| Hydrochloric acid 5% solution |
pr EN50343
(1 minute at 23°C (73°F), 10 wipes) |
Print legible |
| Sodium Hydroxide 5% solution |
pr EN50343
(1 minute at 23°C (73°F), 10 wipes) |
Print legible |
| Heat Ageing |
pr EN50343
(240 hours at 120°C (216°F), 10 wipes) |
Print legible |
Aircraft Fuel
(ISO1817 Liquid B) |
IEC 60684-2
(24 hours at 40°C (104°F), 25 strokes dry tissue) |
Print legible |
Silicone Fluid
(S1714) |
IEC 60684-2
(24 hours at 50°C (122°F), 25 strokes dry tissue) |
Print legible |
| Propan-2-ol |
IEC 60684-2
(24 hours at 23°C (73°F), 25 strokes dry tissue) |
Print legible |
